NC machine for doors, windows, profiles and related products in wood, plastic and non-ferrous metals [DR]

Manipulations

  • Sawing and drilling of different holes on length at the same time.
  • The profile end is drilled and milled at the same time.
  • Various milling techniques for example hinges, lock cases,...
  • Great diversity of work pieces next to windows and doors (see hereafter).

Characteristics

  • Compact machine, takes up little space.
  • The parts are fully finished in one whole put trough.
  • Input of parts and output of finished parts while the machine is producing.
  • Most of the manipulations take place at the same time (and not one after another), which results in a very high production speed.
  • The changing time between 2 work pieces (this is the time there is no machining) is maximum 3 seconds.
  • Parts are clamped while the production process is in full pace.
  • The profiles and glazing beads are finished together.
  • Great accuracy (electronically adjustable) and pure finishing (furniture quality).
  • No chipping while milling or drilling, because off the right and left turning tools at the end or counterprofile.
  • Clamping of the parts: pneumatic and/or with vacuum.
  • Integrated dust extraction pipes, the costumer only needs 1 fix connection of the external fan.
  • Energy saving: the machine only extracts where on that moment machining takes place.
  • Intelligent software: the machine does not need to be programmed at all, a 3D-drawing is sufficient.




Fast and accurate - The times were recorded with a chronometer

  A
cut on length
milling of tenon joints on log ends
side drilling 3 x dia 8mm 50mm deep at an angle 7°
side drilling 3 x dia 16mm 70mm deep
side drilling 1 x dia 10mm 55mm deep
side drilling 3 x dia 8 35mm deep on another level than dia 16
operating time: 26 sec

B
cut on length
milling of tenon joints on log ends
drilling of dowel holes in log ends: 6 holes dia 8mm 35mm deep
operating time: 12 sec

C
cut on length
milling of tenon joints on log ends
side drilling 3 x dia 16mm 70mm deep
side drilling 1 x dia 10mm 55mm deep
side drilling 3 x dia 8 35mm deep on another level than dia 16
milling keyhole
milling door handle
milling striker plate
milling lock case
operating time: 46 sec

D
cut on length
milling of tenon joints on log ends
drilling of dowel holes: 2 x dia 16 mm 70 and 2 x dia 10mm 55
2 x left and 2 x right milling of profiles or curves (not pre sawn)
operating time: 69 sec

E
cut on length
milling of tenon joints on log ends
drilling of dowel holes in log ends:: 4 x dia dia 16mm 70mm deep
operating time: 14 sec

Total time of door 167 seconds

  A
cut on length
milling of tenon joints on log ends
side drilling : 2 holes dia 7mm 40mm deep
operating time: 15 sec

B
cut on length
milling of tenon joints on log ends
operating time: 2 x 12 sec = 24 sec

C
cut on length
milling of tenon joints on log ends
drilling 3 holes: dia 10 dia 14 dia 10
milling lock case
operating time: 21 sec

Total time window 60 seconds

  A
cut on length
milling of tenon joints on log ends
side drilling 9 holes dia 16 mm 70mm deep
operating time: 12 sec

B
cut on length
milling of tenon joints on log ends
drill heads 6 holes dia 16 mm 70 mm deep
operating time: 14 sec

C
cut on length
milling of tenon joints on log ends
side drilling 9 holes dia 16 mm 70 mm deep
milling keyhole
milling door handle
milling striker plate
milling lock case
operating time: 38 sec

Total time of door 92 seconds




Related products that can also be manufactured with this machine, provided the equipment is adapted.
Click on the image below for larger images